How to change the IP address on Sony Smart TV

If you need to determine the IP of your TV, there is nothing complicated about it. Your TV must be connected to the Internet or your home network. Then, in the menu settings, find the item responsible for connecting to the network, and in the network settings, find the IP address of the TV. This procedure is universal and is suitable for most modern TV models of different manufacturers.

It is important to understand that the IP address can be assigned only to those models whose characteristics allow you to configure a connection to the Internet. In our electronic catalog, widely represented models with the ability to connect to the Internet.

Sony has also implemented the Smart TV feature, which opens up a wide range of opportunities for users through access from the Internet.

First preparations

Before I tell you how to change and configure the IP address on your Sony Smart TV, you need to be aware of a few things:

1. First, you must have a good understanding of your network, your router settings, and be able to get the necessary information from your computer to manually set the IP address of your device
2. The design and settings of your router determine the steps for setting an IP address on your device. If your router doesn’t automatically assign an IP address to your device, you may be able to set the IP address manually
3. Some models do not support manual IP address configuration when using the wireless option

How to set up the IP address on Sony Smart TV manually

If you want to set up the IP address on your Sony Smart TV manually, you have to follow these steps:

1. Get the following IP address information from your computer: IP address, Subnet Mask, Default Gateway
2. Enter the IP information in the network settings of your Smart TV

To enter the IP information in the network settings of your Smart TV, you have to follow these steps:

1. First of all, press the “Home” button on the Sony Smart TV remote control
2. Then, go to “Settings”
3. After that, go to “Network” and select “Network setup”
4. Next, select “Expert”
5. Choose your network connection (LAN or Wi-Fi)
6. Go to “IP address” (for older models, select “Advanced options” and then “IP address”)
7. Choose “Static”
8. Finally, enter the IP information from your computer