Even though Samsung makes a fairly high-quality TV, any device’s work can malfunction or error. And if your Samsung LED TV has a blurry screen is worth understanding the causes and then following the universal methods of solving the problem. It is not normal when the LED TVs to have a blurry screen, and many methods help solve this problem. So do not worry and call a master, you can solve it now and do not expect help from specialists.

Sometimes users do not consider this a serious problem and continue watching poor-quality video content on Samsung LED TVs. Many may even mistake it for a bad signal from the provider. That’s why you should first learn about the causes so you can move on to the solution.

Why do you have a blurry screen on Samsung LED TV?

In fact, the causes and further solution methods will work for all TVs since a smeared screen can be on any TV. Therefore, learn about the possible causes so that you can understand your actions to solve them.

A weak internet signal is one of the most common reasons for a blurry screen on your TV. This reason is quite trivial but often overlooked. The blurry screen while watching content on streaming services is most often from the slow Internet.

If you are watching content with another device and HDMI cable, the cause may be in it. Sometimes a damaged cable causes low resolution and interruptions in the video.

Also sometimes the resolution settings are not correct. If this is the case, you can solve this problem in a minute.

In general, there are 2 types of reasons for blurry screens. These are hardware and software. So follow the further recommendations to fix it and watch high-resolution content.

What to do to fix Samsung LED TV’s blurry screen?

If you don’t know why the screen on your Samsung TV is blurry, it’s best to follow these universal recommendations one by one. Since I’ll describe the more common solutions first, and that might help you faster.

Check your Internet connection

You should check your Internet speed whether you are watching content using a streaming service or streaming video via an HDMI cable from another device.

If you notice that the picture quality changes, it is most likely due to a speed bump on the Internet. That is, it usually looks like the picture quality changes from low to high and the other way around.

In this case, you can use the Speedtest service on one of the devices if you use the same hotspot. Also, reboot your router and contact your ISP.

Reset picture settings

You can also reset the picture settings to correct this bug. In order to do so, you need to follow these steps:

• The first step is to open Settings on your Samsung TV.
• Then after that, select the Picture section.
• Next, you need to click on Expert Settings.
• Then after that, click Reset Picture.

After these steps, you should watch TV video to check the picture quality.

Change your Samsung LED TV aspect ratio

Another reason the screen may be blurred is the wrong zoom settings. In such cases, the video may be of bad quality. To change your Samsung LED TV aspect ratio, you need to follow these steps:

• The first step is to open Settings on Samsung TV.
• Then after that, you need to select the Picture section.
• Then you need to select Picture Mode.
• Select the aspect ratio (16:9).

The aspect ratio (16:9) is the most correct so that the picture is not stretched. After these steps, turn on any channel or video to see if the picture quality has changed.

Update your Samsung LED TV

Sometimes the problem is a fairly obvious reason that few people think about. Sometimes the streaming service apps do not support the picture quality because the TV has old software installed.

That is, the new content is intended for the new update and as a result, the image quality can deteriorate. To update your Samsung LED TV, you need to follow these steps:

• The first step is to press the Home button on your remote control.
• Then select the Settings section.
• Next, you need to select the Support section and click on Software Update.
• Then click on Update Now.

After these steps, you need to wait sometime for the TV to complete the update process. Then test the picture quality afterward.