How To Fix LG Magic Remote Not Working

Share on facebook
Share on twitter
Share on email
Share on telegram
lg-magic-remote-not-working

If you’re using LG TV, then one day you suddenly find that your LG TV remote isn’t working anymore. Perhaps the problem may not be so serious to make you contact the service center, so some tips may help you fix your LG TV Magic remote.

Why My LG Magic Remote Isn’t Working?

Magic Remote connects to your TV via Bluetooth. The cause of the problem may be different. We will consider only the most common ones and those that you can solve at home.

  • If you have a brand new Magic Remote than you need to conduct ‘first connection’ before using the remote.
  • Check if Magic Remote isn’t discharged.
  • Software lag, you need to reset your Magic Remote and reconnect it.

As you can see, there may be quite a few reasons why your LG Magic Remote may not work. It is a good thing that these problems are usually minor ones, and you can fix your remote at home, without contacting the service center.

LG Magic Remote Isn’t Working How To Fix

LG Magic Remote Isn’t Working How To Repair

Firstly, if this is a new Magic Remote that you have not used before, then try to connect it to LG TV.

Turn the TV on and turn off another remotely supported technique to avoid errors, then put Magic Remote near the TV and hold the MUTE or OK button for 5-10 seconds. Then, you will see a message on the screen of your TV that Magic Remote was connected.

Secondly, if you have already used this Magic Remote but it has stopped working, the problem may be that the remote has been discharged. In this case, you need to replace the batteries with new ones. It seems to be a trivial tip, but often, my mates forget that the remote can be discharged. So the problem can be so easy-to-solve.

Thirdly, the problem may be in software lag. I can’t say for sure why this problem occurs sometimes, but your Magic Remote may not work due to this problem. To fix it, you will need to disconnect the LG Magic Remote and reconnect it more.
To do this, press the two BACK and HOME buttons on the remote at the same time. Hold buttons for 10 seconds, and your remote will be disconnected.
You can then reconnect your TV to the remote control, as described at the beginning of this paragraph. It is better to do all these actions next to the TV. We recommend that you do all the steps on the remote control next to the TV set.

If none of the above has helped, then most likely, the problem is more serious. In this case, it is better to contact the service center to get qualified help.

Discussion

Leave a Reply

Your email address will not be published.